D60S

System Performance Indicators

Model

D60I water cooling

D60 water cooling

Wavelength

9.3±0. 1μm

10.6±0. 1μm

Continuous Rated Output Power

≥40W

≥60W

Power stability rate

±5%

±5%

M²-Beam quality

M2﹤1.2

Beam diameter（1/e²）

1.8±0.2mm

Beam divergence angle

7.5±0.5m rad full angle

Degree of polarization

Linear polarization (>100:1) parallel to the width direction

Operating frequency and duty cycle

0～25KHZ ，0～100%DC

Specification and use conditions

Weight

10.0kg

10.0kg

Dimension L*W*H

580×92.5×142mm

580×92.5×104mm

Input Voltage

48VDC±2% range, maximum average current 25A

Thermal load

﹤1200W

Maximum temperature of tube casing

﹤60℃（140℉)

Ambient Air Temperature

5℃~40℃(41℉~104℉)

Altitude

﹤2000m(6 ，500ft.)

Humidity

Non-condensing

Shipping and Storage Environment

-10℃~60℃(14℉~140℉) ，Non-condensing

Cooling water parameter

Cooling water speed

4L/min

Maximum Cooling Water Pressure

0.7Mpa

Cooling water temperature range

15~30 °C

1. Laser power is measured under laser temperature conditions of 25°C. For each 1°C increase above 25°C, the output power decreases by approximately 1%

2. Stability is defined as ±(Pmax - Pmin)/(2Pmax).

Stability testing conditions: Power on and preheat for 10 minutes, maintaining a constant duty cycle, under normal operating conditions.